Basic Setting
as topologyRequirements
Configure IP for interfaces as required and to ensure these interfaces are up, and your should confirm your configuration with ping.Procedures
On PC0
On PC1
On Router0
Router>en
Router#confi t
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip add
Router(config-if)#ip address 192.168.0.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#exit
Router(config)#interface serial 2/0
Router(config-if)#clock rate 64000
Router(config-if)#ip address 172.16.0.1 255.255.255.0
Router(config-if)#no sh
On Router1
Router>en
Router#confi t
Router(config)#int s3/0
Router(config-if)#ip address 172.16.0.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#exit
Router(config)#int serial 2/0
Router(config-if)#clock rate 64000
Router(config-if)#ip address 172.16.1.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#^Z
Router#ping 172.16.0.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.0.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 2/3/5 ms
Router#
On Router2
Router>enRouter#conf t
Router(config)#int serial 3/0
Router(config-if)#ip address 172.16.1.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#exit
Router(config)#interface serial 2/0
Router(config-if)#clock rate 64000
Router(config-if)#ip address 172.16.2.1 255.255.255.0
Router(config-if)#no sh
Router#ping 172.16.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 3/4/6 ms
On Router3
Router#confi t
Router(config)#int s3/0
Router(config-if)#ip add
Router(config-if)#ip address 172.16.2.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#exit
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no sh
Router#ping 172.16.2.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.2.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 2/4/6 ms
Router#
No comments :
Post a Comment